White Westinghouse 241997501 사용자 설명서
6
Handle
Dovetail
Button
Screw
Screw
Lock Handle
over
Dovetail
Button
DOOR RemOval / ReveRSal INSTRuCTIONS
Handle
Screw
Screw
Dovetail
Button
Button
Lock Handle
over
Dovetail Button
Self Adhesive
Nameplate
(some models)
Nameplate
TO RemOve fReezeR haNDle:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
1. Remove two screws attaching handle to bottom of freezer
door.
2. Swing bottom of handle away from the door and slide
handle straight up and off of dovetail button.
3. Remove screw and dovetail button and install on other
side, using the same holes as nameplate.
4.
Self-adhesive Nameplate models: Use putty knife to
gently peel off nameplate from door and reapply over old
handle holes.
TO aTTaCh fReezeR haNDle:
1. Start with handle offset away from door. Place top of handle
over dovetail button, swing handle into an upright position
and pull downward, locking it into place.
2. Secure bottom of handle with two screws removed earlier.
TO RemOve RefRIgeRaTOR haNDle:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to top of refrigerator
1. Remove two screws attaching handle to top of refrigerator
door.
2. Swing top of handle away from door and slide handle
down and off of dovetail button.
3. Remove screw and dovetail button and install on other side,
moving hole plugs from corresponding holes to opposite
side.
TO ATTACH REFRIGERATOR HANDLE:
1. Start with handle offset away from door. Place bottom of
1. Start with handle offset away from door. Place bottom of
handle over dovetail button, swing handle into an upright
position and pull upward, locking it into place.
2. Secure top of handle with screws.