Wachsmuth & Krogmann XB6168 사용자 설명서

 

5

 

It is recommended that the water kettle be rinsed with water prior to use to remove any 
material or dust in the appliance from the manufacturing process. 

 
 

OPERATION 
 

1.  Open the top cover lid by pulling the lid upwards and fill water into the kettle. Do 

not overfill.  If the kettle is overfilled there is a risk of spillage or spitting of boiling 

water.  The water level indicator will assist you to measure correct amount of water. 
Caution: The filled water level must be between the Max and Min level as indicated 

on the housing. Too less water will do damage to the heating element. 

2.  Replace the kettle on the base and connect to power supply. Position the kettle so 

that the spout of kettle is facing away from you. 

3.  Turn on kettle by pressing down the switch.  Once switch is pressed down the lamp 

will be illuminated and water will begin to heat up.  Do not remove the lid while the 

water is boiling. 

4.  Once water is boiled the switch will flip up, the light indicator will turn off and the 

power will turn off automatically. 

5.  The boiling process can be terminated at any time by lifting the kettle off the base. 

6.  Unit should be unplugged when not in use. 

 

 

Always be sure that the appliance is switched OFF before cleaning or attempting to store 
the item. 

 

 

1.  Do not immerse power cord, kettle and base in water. 

2.  Wipe the exterior and top cover lid of kettle with a soft damp cloth or sponge.  

Remove stubborn spots with a cloth moistened with mild liquid detergent.  Do not 

use abrasive scouring pads or powders. 

3.  From time to time, depending on the nature of your water, mineral deposits can 

build up on the inside of your kettle.  You can remove this buildup by filling the kettle 
half way with water.  Add 1 fluid oz. of white vinegar to the water.  Boil the mixture 

and allow to stand for 30 minutes.  Re-boil the mixture and allow to stand for 30 
seconds.  Repeat procedure for a third time.  Empty, rinse well and continue to use 
in the normal way as described under OPERATION. 

4.  Do not attempt to dismantle the kettle or base. No user serviceable parts are inside 

the kettle and base.  For any problem, contact the authorized service facility for help.  

 

 

Allow the appliance to cool completely before storing.  Store the appliance in a dry 
location.  Do not place any heavy items on top of appliance during storage as this may 

result in possible damage of appliance.