Sony Music Entertainment Video Games DXF-C50WA 사용자 설명서

Using the Focus Assist Function

32

Insert the tabs on the sides of the number plate into each 
slit in the up-tally lamp.

This function can be used to sharpen the edges of an 
image that is specified using the color, area selected, or 
both. You can also enhance the edges of the entire image. 
This function has no effect on the camera’s video output 
signals.

Press the ASSIGN. switch that is assigned the 
PEAKING PLUS function to switch to the 
PEAKING PLUS mode.

You can also set to this mode using “PEAKING 
MODE” from the PEAKING menu (see page 39).

Select “COLOR” under “COLOR/AREA SEL” of 
the PEAKING menu.

Press and hold the ASSIGN. switch that is assigned 
the PEAKING PLUS function for 1 second or more 
(the detection area marker appears in the center of 
the screen), align the color to be corrected in the 
detection area marker, and then release the switch.

The color that is to be corrected will be detected.

: Effective edge enhancement area

Adjust the effective edge enhancement area of the 
color using the following menus in the PEAKING 
menu.

• HUE PHASE: Hue center position
• HUE WIDTH: Hue range
• SAT WIDTH: Saturation range

1

Up-tally lamp

Number plate

Slit

Detection 
area marker