Sony Music Entertainment Video Games DXF-C50WA 사용자 설명서

Using the Level Adjust Function

35

This function can be used to display the output level of the 
camera after adjustment inside the unit.

• The output level of camera cannot be adjusted. This 

function has no effect on the camera’s output signals.

• Set the camera not to display the characters or the 

markers before executing “AUTO SETUP.”

Input the built-in color bar signal of camera to the 
viewfinder.

The viewfinder can display the color bars below.
• 75% full field color bar
• 100-75% full field color bar
• 100% full field color bar
• SMPTE  color  bar
• Multi-format color bar

Select the color bar to display in the viewfinder 
under “COLOR BARS” of the LEVEL ADJUST 
menu.

The viewfinder recognizes the type of color bar input 
from the camera automatically when “AUTO” is 
selected.
To set the color bar manually, select one of the color 
bars below.

7575: 75% full field color bar
10075: 100-75% full field color bar
100: 100% full field color bar
SMPTE: SMPTE color bar
MULTI: Multi-format color bar

Select “AUTO” under “AUTO ADJUST” of the 
LEVEL ADJUST menu.

For a specified camera, you can also select “PRST 
1,” “PRST 2,” “PRST 3” or “PRST” instead of 
“AUTO.” For details, see “AUTO ADJUST” in the 
LEVEL ADJUST menu, on page 43.

Select “EXEC” under “AUTO SETUP” of the 
LEVEL ADJUST menu.

Select “YES.”

The setting is executed. Select “NO” to cancel.
“COMPLETE” is displayed when setting is finished.
“ERROR” is displayed if a setting is not finished 
completely. In this case, input the color bar correctly 
from step 3.