Sony Water Dispenser 2 사용자 설명서

187

Shotbox Execution

  Cha

p

te

r 15 

Ut
ilit
y/

S

hot

bo
x

In the numeric keypad control block, press the [SHOTBOX] button, 
turning it on.

• This allocates the numeric keypad control block to shotbox operations.
• The [RCALL] button lights amber.
• The display shows the last recalled register number.

With the numeric keypad buttons, enter the desired register number.

• The display now shows the entered register number.
• If the specified register is empty, an “E” automatically appears after the 

register number.

Press the [ENTER] button.

• This runs the specified shotbox register.
• The number of the recalled register appears in the display.
• The region selection buttons corresponding to the regions for which the 

effect is set light.

• If auto run is set for the specified shotbox register, on recall the effect is 

immediately executed.

• If you recall an empty register, then shotbox execution has no effect.

When auto run is not set for the recalled register
Simply recalling the register does not run the effect. To do this, in the 
keyframe control block, press the [RUN] button.

Use the following procedure.

In the simple type of Flexi Pad control block, shotbox operations are not 
possible.

In the Flexi Pad control block, press the [SHOTBOX] button, lighting the 
[SHOTBOX] button amber.

• This allocates the Flexi Pad control block to shotbox operations.
• The previously selected bank number and the last recalled register 

number appear in the numeric display.

Using any of the following methods, select the bank.

• To select a register in bank 0, press the [BANK 0] button.
• To select a register in bank 1, press the [BANK 1] button.