Sony Water Dispenser 2 사용자 설명서

  

 Chapt

er

 16

 

Eng

inee

ring
 S
e

tu

p

228

Setup Relating to Operations From the Control Panel

Turn the knob to select the device selection button (DEV1 to DEV12) for 
sharing the file list.

Press [Same File List Set].

This is reflected in the file list in the status area.

Repeat steps 

 to 

 as required to select other devices for sharing the file 

list.

To make settings relating to panel operation, use the Panel>Operation menu.

In the Engineering Setup menu, select VF2 ‘Panel’ and HF6 ‘Operation.’
The status area shows the items that can be set and a list of the settings.

To set the high tally state reflected on the control panel, select any of the 
following in the <Button Tally> group.
System: The overall system tally state is reflected on the control panel.
Independ: The tally state of the switcher only is reflected on the control panel.

To determine whether to display transition rate values in menus and on the 
control panel in frames or as timecode values, select one of the following in the 
<Trans Rate Display> group.
Frame: display in frames.
Timecode: display as timecode (SS:FF).

To make settings relating to the functions used when carrying out keyframe 
effect operations, use the following procedure.

In the Panel>Operation menu, press [Effect Mode].

The Effect Mode menu appears.

2

File List

Device selection button for 
sharing the file list

1 to 12