Sony Water Dispenser 2 사용자 설명서

239

Setup Relating to Switcher Processor

  

Ch
apt

er 16 

E

ngin

eering Se

tup

Select the M/E you want to logically set to the PGM/PST from the 
<Logical M/E to Physical P/P> group.

P/P: assign the physical PGM/PST as logical PGM/PST.
M/E-1: assign the physical PGM/PST as logical M/E-1.
M/E-2: assign the physical PGM/PST as logical M/E-2.
M/E-3: assign the physical PGM/PST as logical M/E-3.

For setup relating to signal inputs, use the Switcher>Input menu.

In the Engineering Setup menu, select VF3 ‘Switcher’ and HF2 ‘Input.’
The status area shows source numbers and source names, input signal phase, 
and through mode on/off setting.

Use the following procedure.

In the Switcher>Input menu, select the input signal to which the settings 
apply.

• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.

The selected input signal appears in reverse video.

Press [Input Phase Adj].

To adjust the phase, adjust the following parameter.

1

Src No

Input signal selection

1 to 80

2

Phase

Input signal phase

−

16 to +16