Sony Water Dispenser 2 사용자 설명서
Chapt
er
16
Eng
inee
ring
S
e
S
e
tu
p
248
Setup Relating to Switcher Processor
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
The selected bank appears in reverse video.
Selecting the key memory mode
In the <Key Memory> group of the Switcher>Key/Wipe/FM menu, select one
from Full (full mode)/Simple (simple mode)/Off.
from Full (full mode)/Simple (simple mode)/Off.
For more details, see “Key Memory” in Chapter 1 (Volume 1).
Selecting the processing order of masks and borders
In the <Mask/Border Process> group of the Switcher>Key/Wipe/FM menu,
select one of the following.
Mask>Border: Apply the mask effect, then apply the border effect.
Border>Mask: Apply the border effect, then apply the mask effect.
select one of the following.
Mask>Border: Apply the mask effect, then apply the border effect.
Border>Mask: Apply the border effect, then apply the mask effect.
Selecting the key priority operation mode
In the <Key Priority> group of the Switcher>Key/Wipe/FM menu, select one
of the following.
Normal: The key priority sequence can be varied freely.
Fix: Fixed at currently set priority sequence.
of the following.
Normal: The key priority sequence can be varied freely.
Fix: Fixed at currently set priority sequence.
Setting the operation mode of the key bus [XPT HOLD] button
In the <Xpt Hold Mode> group of the Switcher>Key/Wipe/FM menu, select
any of the following.
Key Disable: The [XPT HOLD] button of the key bus functions as a key
any of the following.
Key Disable: The [XPT HOLD] button of the key bus functions as a key
disable button. When the [XPT HOLD] button is on, recalling a snapshot
or keyframe effect does not reflect the key settings, including the cross-
point selection information.
or keyframe effect does not reflect the key settings, including the cross-
point selection information.
Xpt Hold: The [XPT HOLD] button of the key bus functions as a cross-point
hold button. When the [XPT HOLD] is on, recalling a snapshot or
keyframe effect does not reflect the cross-point selection information.
keyframe effect does not reflect the cross-point selection information.
Setting the operation mode when the pattern limit is released
In the <Pattern Limit Transition> group of the Switcher>Key/Wipe/FM menu,
select either of the following operation modes.
select either of the following operation modes.
Knob
Parameter
Adjustment
Setting
values
values
1
Bank
M/E or P/P selection to which settings apply
1 to 4