Sony Water Dispenser 2 사용자 설명서
263
Setup Relating to DME
Ch
apt
apt
er 16
E
ngin
eering Se
tup
2
Using any of the following methods, select the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
3
To apply the selection made in step
2
when the input is high, press [H Set].
To apply the selection made in step
2
when the input is low, press [L Set].
This confirms the setting, which appears in the status area.
Making DME GPI output settings
Use the following procedure.
1
In the DME>Device Interface menu, press [DME1 GPI Output].
The DME1 GPI Output menu appears.
The output port selection is fixed at 1.
The output port selection is fixed at 1.
2
In the <Trigger Type> group, select the trigger polarity.
Status: Depending on the status, the relay contacts are closed or opened,
or the output is switched between high and low.
No Operation: The trigger has no effect on the relay state or output level.
3
Using any of the following methods, select the action you want to set.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
a) Error Make, Error Break, No Action
4
Press [Action Set] to confirm the action selection.
The selected setting appears in the status area.
Making editor port settings
In the <DME1 Editor Port Setting> group of the DME>Device Interface menu,
press either of the following to select the way in which the editor ports are used.
press either of the following to select the way in which the editor ports are used.
Knob
Parameter
Adjustment
Setting values
1
No
Signal format/screen aspect ratio
selection
selection
1 to ...
Knob
Parameter
Adjustment
Setting values
2
Action
Action selection
1 to 3
a)