Sony Water Dispenser 2 사용자 설명서
Ch
apt
apt
er 18
Ma
c
ros
320
Macro Operations in the Flexi Pad Control Block
incorporated into the macro being edited. However, the macro assigned
to the button is not executed.
to the button is not executed.
• While carrying out macro editing in the Flexi Pad control block,
absolutely no macro operations are possible in the Flexi Pad control
blocks for other M/E and PGM/PST banks. Macro operations from the
numeric keypad control block are also not possible.
blocks for other M/E and PGM/PST banks. Macro operations from the
numeric keypad control block are also not possible.
To cancel the saving of a macro
To cancel the saving of a macro immediately after performing it, hold down the
[STORE STATS] button and press the [UNDO] button.
[STORE STATS] button and press the [UNDO] button.
Inserting a pause event
Use the following procedure.
1
Press the [PAUS] button in the memory recall section.
The buttons in the memory recall section change as follows.
2
Enter the length of pause you want to set (1 to 999 frames).
3
Press the [PAUS ENTR] button.
This sets the pause length, and inserts the pause event.
The memory recall section display returns to its former state.
The memory recall section display returns to its former state.
Deleting a macro
Use the following procedure.
1
In the Flexi Pad control block, press the [MCRO] button.
This assigns the Flexi Pad control block to macro operations.
The numeric display shows the previously selected bank number and the
number of the last recalled register.
The numeric display shows the previously selected bank number and the
number of the last recalled register.
7
8
9
4
5
6
1
2
3
0
PAUS
ENTR
ENTR
CLR