Sony Water Dispenser 2 사용자 설명서
Ch
apt
apt
er 11
DME
O
per
at
io
ns
36
DME Special Effect Operations
2
Press [Mosaic], turning it on.
The Mosaic effect is enabled. You can adjust the size and aspect ratio of
the mosaic tiles with the knobs.
the mosaic tiles with the knobs.
3
Set the parameters.
a) Specify minus values to stretch the tiles in the vertical direction, and plus values to stretch
the tiles in the horizontal direction.
Freeze Settings
This effect freezes the input video. The following types are available:
• Hard Freeze
• Time Strobe
• Film
• Hard Freeze
• Time Strobe
• Film
For details of the operation modes, see “DME Special Effects” in Chapter 1
(Volume 1).
(Volume 1).
To apply a Freeze effect, start by displaying the Freeze menu. In the DME
menu, select VF3 ‘Freeze’ and HF1 ‘Freeze.’
menu, select VF3 ‘Freeze’ and HF1 ‘Freeze.’
Applying the Hard Freeze effect
Use the following procedure.
1
In the <Freeze Timing> group, select the signal freeze timing.
Frame: Freeze one frame of signal.
Field 1: Freeze the first field of signal.
Field 1: Freeze the first field of signal.
2
In the <Freeze> group, press [Hard Freeze], turning it on.
The Hard Freeze is executed, displaying a still image.
Applying the Time Strobe effect
Use the following procedure.
1
In the <Freeze Timing> group, select the signal freeze timing.
Frame: Freeze one frame of signal.
Knob
Parameter
Adjustment
Setting values
1
Size
Size of tiles
0.00 to 100.00
2
Aspect
Aspect ratio of tiles
−
100.00 to +100.00
a)