Sony Water Dispenser 2 사용자 설명서
Ch
apt
apt
er 11
DME
O
per
at
io
ns
70
DME Special Effect Operations
2
Set the following parameters.
a) The way in which the trail disappears is affected by both Decay and Trail Dust parameter
adjustments.
Motion Decay Settings
When the video image is a moving image, you can blur the motion by creating
motion trails (or afterimages).
motion trails (or afterimages).
For sample images, see “DME Special Effects” in Chapter 1 (Volume 1).
Note
When you turn on motion decay, if the trail or keyframe strobe effect is on, it
automatically goes off.
automatically goes off.
Blurring image motion
Use the following procedure.
1
In the DME menu, select VF5 ‘Light/Trail’ and HF3 ‘Motion Decay.’
The Motion Decay menu appears.
2
Press [Motion Decay], turning it on.
This enables motion decay, and you can now use the knobs to adjust the
parameters.
parameters.
3
Set the following parameter.
a) At the setting 0.00, there is no afterimage. At a setting of 100.00, the afterimage does not
decay.
Knob
Parameter
Adjustment
Setting values
1
Trail Dust
Amount of the trail disappearing as
stardust
a)
0.00 to 100.00
2
Dust Soft
Timing with which stardust
disappears
disappears
0.00 to 100.00
3
Dust Size
Size of stardust
0.00 to 100.00
4
Dust Aspect
Aspect ratio of stardust
–100.00 to +100.00
Knob
Parameter
Adjustment
Setting values
1
Video Decay Degree of blurring of the video
signal
0.00 to 100.00
a)