Sony PCM-D50 사용자 설명서
PCM-D50. US. 3-277-770-12(1)
22
Recording (continued)
When rotating both capsules of the
microphones to 120˚ to face outside (Wide
stereo position)
microphones to 120˚ to face outside (Wide
stereo position)
The microphone on the right records sound
from the right; the microphone on the left
records sound from the left.
You can obtain dynamic stereo sound
recording. This position is recommended for
recording a remote sound source such as a
chorus, an orchestra, or other performance
of a large number of people.
from the right; the microphone on the left
records sound from the left.
You can obtain dynamic stereo sound
recording. This position is recommended for
recording a remote sound source such as a
chorus, an orchestra, or other performance
of a large number of people.
Records
sound from
the right.
sound from
the right.
Records
sound from
the left.
sound from
the left.
To switch the microphone input sensitivity
Use the MIC ATT switch.
Usually set it to the “0” position. When
recording loud sounds, set it to the “20”
position.
Usually set it to the “0” position. When
recording loud sounds, set it to the “20”
position.
To record according to sound sources
You can change the LOW CUT FILTER
switch and LIMITER switch settings
according to the sound sources.
switch and LIMITER switch settings
according to the sound sources.
LIMITER switch
LOW CUT FILTER
switch
To reduce the noise caused by wind or
breath, set the “LCF” from the menu and
set the LOW CUT FILTER switch to “ON.”
To reduce the distortion that may be
caused by a sudden input of loud sound,
set the “LIMITER” from the menu and set
the LIMITER switch to “ON.”
breath, set the “LCF” from the menu and
set the LOW CUT FILTER switch to “ON.”
To reduce the distortion that may be
caused by a sudden input of loud sound,
set the “LIMITER” from the menu and set
the LIMITER switch to “ON.”
To position the recorder using the tripod
(not supplied)
(not supplied)
By attaching an optional tripod (VCT-PCM1)
to the hole on the back of the recorder, you
can adjust the angles of the recorder and the
microphones more precisely. This also
prevents noise caused when holding the
recorder in your hand.
to the hole on the back of the recorder, you
can adjust the angles of the recorder and the
microphones more precisely. This also
prevents noise caused when holding the
recorder in your hand.
To use the wind screen (not supplied)
By fitting the optional wind screen (AD-
PCM1) to the built-in microphones, you can
reduce noise caused by wind or breath that
hits the microphones directly.
PCM1) to the built-in microphones, you can
reduce noise caused by wind or breath that
hits the microphones directly.