Sony PCM-D50 사용자 설명서
PCM-D50. US. 3-277-770-12(1)
48
Troubleshooting
If you experience trouble with your recorder, try the following solutions.
1
Turn off the recorder completely by removing the batteries and the AC power adapter, and
then turn it on again. Or use the recorder to initialize the built-in memory or the “Memory
Stick.” (Note that initializing will delete all data in the memory or in the “Memory Stick.”)
then turn it on again. Or use the recorder to initialize the built-in memory or the “Memory
Stick.” (Note that initializing will delete all data in the memory or in the “Memory Stick.”)
2
Read through the symptoms and solutions on pages 48 to 51 and messages on pages 51
to 53 to check your recorder.
to 53 to check your recorder.
3
If the problem persists, consult with qualified Sony personnel (see the warranty for contact
information).
information).
Symptom
Cause/Solution
The recorder does not
operate.
operate.
The batteries have been inserted with incorrect +/– directions. Reinsert
them correctly (page 17).
The batteries are exhausted. Replace them with new ones (page 17).
The buttons are locked with the HOLD switch. Set the HOLD switch to the
“OFF” position (page 14).
The POWER switch is set to the “OFF” position. Set it to the “ON” position.
them correctly (page 17).
The batteries are exhausted. Replace them with new ones (page 17).
The buttons are locked with the HOLD switch. Set the HOLD switch to the
“OFF” position (page 14).
The POWER switch is set to the “OFF” position. Set it to the “ON” position.
You cannot start
recording.
recording.
The INPUT switch is in the wrong position. Set it to the “
” (microphones)
position when using the built-in microphones or an external microphone to
input audio for recording. Set it to the “LINE” position when external
equipment is connected for recording (pages 23, 28 - 30).
The memory is full, or a maximum number of tracks (page 38) have already
been recorded. Delete some of the tracks (page 35) or store the tracks on
the hard disk of your computer (page 36), and then delete them from the
recorder. You can also use a “Memory Stick” with sufficient capacity (page
46).
99 tracks have already been recorded in the selected folder and you cannot
record any more tracks. Select another folder (page 23) or delete some of
the tracks (page 35).
The write-protect switch on the inserted “Memory Stick” is set to “LOCK.”
Release the lock.
Check the “PLUG IN PWR” setting of the menu when you use an external
microphone.
input audio for recording. Set it to the “LINE” position when external
equipment is connected for recording (pages 23, 28 - 30).
The memory is full, or a maximum number of tracks (page 38) have already
been recorded. Delete some of the tracks (page 35) or store the tracks on
the hard disk of your computer (page 36), and then delete them from the
recorder. You can also use a “Memory Stick” with sufficient capacity (page
46).
99 tracks have already been recorded in the selected folder and you cannot
record any more tracks. Select another folder (page 23) or delete some of
the tracks (page 35).
The write-protect switch on the inserted “Memory Stick” is set to “LOCK.”
Release the lock.
Check the “PLUG IN PWR” setting of the menu when you use an external
microphone.
Digital Synchronized
Recording cannot be
performed.
Recording cannot be
performed.
Digital Synchronized Recording cannot be performed when the connected
device outputs digital signals even when playback is stopped (page 30).
device outputs digital signals even when playback is stopped (page 30).
The ACCESS indicator,
peak level lamps, or
peak level lamps, or
REC /
PLAY/
ENTER /
PAUSE
indicators
do not light/flash.
do not light/flash.
The “LED” item in the menu is set to “OFF.” Display the menu and set it to
“ON” (page 41).
“ON” (page 41).