Raritan Engineering Water System MCCAT18 사용자 설명서
Chapter 2: Quick Start
11
Now you can control the computer with the keyboard and mouse
attached to the MCCAT unit.
attached to the MCCAT unit.
Warning!! MCCAT does not support real‐time channel detection when
channel changes occur. Therefore, if you disconnect the computer from
the channel you are accessing now and reconnect another computer to
that channel, you must activate the OSD to select the same channel
again. Otherwise, you may have mouse or keyboard input issues with
the channel being accessed.
channel changes occur. Therefore, if you disconnect the computer from
the channel you are accessing now and reconnect another computer to
that channel, you must activate the OSD to select the same channel
again. Otherwise, you may have mouse or keyboard input issues with
the channel being accessed.
Changing Channel Names
By default, the connected device or computerʹs name is shown
“PC<XXXX>,” and a second‐tier MCCAT unitʹs name is shown
“/MCCAT<XX>” in the On‐Screen Display (OSD). <XXXX> or <XX>
indicates the channel number but may not be meaningful for you to
identify the connected device. Therefore, it is recommended to change the
default channel name(s) for better identification.
“PC<XXXX>,” and a second‐tier MCCAT unitʹs name is shown
“/MCCAT<XX>” in the On‐Screen Display (OSD). <XXXX> or <XX>
indicates the channel number but may not be meaningful for you to
identify the connected device. Therefore, it is recommended to change the
default channel name(s) for better identification.
1. (Optional) If the OSD is not onscreen, press the hot key twice
QUICKLY (default: Scroll Lock) to activate it. The Selection Menu
appears.
appears.