Yorkville FH2W 사용자 매뉴얼

w w w . y o r k v i l l e . c o m

Yorkville Sound

550 Granite Court

Pickering, Ontario

L1W-3Y8 CANADA

Canada

Voice: (905) 837-8481

Fax: (905) 837-8746

Yorkville Sound Inc.

4625 Witmer Industrial Estate

Niagara Falls, New York

14305 USA

U.S.A.

Voice: (716) 297-2920

Fax: (716) 297-3689

Printed in Canada

Yorkville FH2

C12/C15 Flying Hardware

The FH2 hardware kit has been specifically designed to expand the C12 and C15’s

already advanced mounting capabilities. A single FH2 installation kit is the ideal rigging

solution for installing Yorkville Sound Coliseum Series C12 or C15 speakers. This kit has

been built for hanging solo cabinets or two-enclosure arrays.

The staggered hole pattern on the FH2 allows for a multitude of tilt angles simply by

moving the shackle towards front or the rear of the bracket. If a greater down-tilt angle is

required, simply add an eye-bolt to the pullback point located on the rear of the cabinet.

When using C12 or C15 cabinets in two cabinet arrays, the FH2 splays the loudspeakers

at the ideal angles to minimize interference and acoustic lobing.

IMPORTANT!! The rigging of loudspeaker systems is an extremely serious matter!

Overhead rigging requires extensive experience, including (but not limited to) calculating

working load limits, hardware installation, and periodic safety inspection of all hardware

and cabinetry. If you lack these qualifications, do not attempt the installation yourself,

but instead use a professional structural rigger. Improper installation can result in bodily

injury or death. Consult a structural engineer to calculate added loads upon the building.

Structural reinforcement may be necessary to insure a safe installation.

Flying Arrays

A single FH2 kit can be used to attach

two cabinets together in a horizontal array

increasing dispersion and helping the cabi-

nets cover a wider area.
Mounting the FH2 Bracket

on Individual Enclosure

The FH2 bracket has been designed to allow

either individual or multiple enclosures to be

flown. In order to fly an individual enclosure,

follow these simple instructions.

Kit Includes

1 FH2W (white) or FH2B (black) Bracket

1 Z1389 Support Plate

1 Z1390 Support Plate

8 YS#8974 1/4-20 X 1 1/4 HEX HEAD BOLT

8 YS#8489 1/4-20 SPLIT WASHER BLACK OXIDE

Flyware Bracket System

YS#8974 x8

YS#8489 x8

Z1389W or Z1389B

Z1390W or Z1390B

FH2W(white) or FH2B (black)