Yaesu FT-450D 사용자 설명서
Page 15
FT-450D O
PERATION
M
ANUAL
[F] button
[DSP/SEL] knob
H
OW
TO
USE
THE
[DSP/SEL]
KNOB
E
ASY
O
PERATION
When a DSP function is not selected and no “>” icon
is shown in the LCD Graphic Display, then turning
the [DSP/SEL] knob controls the frequency in VFO
mode, or selects the memory channel in memory
mode, or selects the menu item in memory mode. In
the VFO Mode, briefly depressing the [DSP/SEL]
knob will permit frequency adjustment in 100 kHz
steps (Default setting). (The 100 kHz operation may
be changed with the“SELDIAL” menu function.)
is shown in the LCD Graphic Display, then turning
the [DSP/SEL] knob controls the frequency in VFO
mode, or selects the memory channel in memory
mode, or selects the menu item in memory mode. In
the VFO Mode, briefly depressing the [DSP/SEL]
knob will permit frequency adjustment in 100 kHz
steps (Default setting). (The 100 kHz operation may
be changed with the“SELDIAL” menu function.)
When a DSP function is selected, the “>” icon will
appear next to the function in the LCD Graphic Dis-
play. Then pressing the [DSP/SEL] knob will switch
the DSP function on or off. When the DSP function is
on, turning the [DSP/SEL] knob will change the func-
tion parameters.
appear next to the function in the LCD Graphic Dis-
play. Then pressing the [DSP/SEL] knob will switch
the DSP function on or off. When the DSP function is
on, turning the [DSP/SEL] knob will change the func-
tion parameters.
A
DVICE
:
You may change the function of the [DSP/SEL] knob
via menu item “SELDIAL”.
via menu item “SELDIAL”.
M
ENU
O
PERATION
The Menu System allows you to customize a wide variety of transceiver performance aspects and operating
characteristics. After you have initially customized the various Menu procedures, you will find that you will not
have to resort to them frequently during everyday operation.
characteristics. After you have initially customized the various Menu procedures, you will find that you will not
have to resort to them frequently during everyday operation.
1. Press and hold the [F] button for one second to
enter the Menu Mode. The “
” icon will ap-
pear on the display.
2. Rotate the [DSP/SEL] knob to select the Menu
Item to be adjusted.
3. Press the [DSP/SEL] knob to enable adjustment of
the selected Menu Item. The “
” icon will blink.
4. Rotate the [DSP/SEL] knob to adjust or select
the parameter to be changed.
5. Press the [DSP/SEL] knob to save the selection.
The icon appears continuously.
6. Press and hold the [F] button for one second to
return to normal operation.
Menu Item or Menu Setting
[DSP/SEL] knob