Yaesu FT-450D 사용자 설명서
Page 62
FT-450D O
PERATION
M
ANUAL
M
EMORY
O
PERATION
Labeling Memories
You may wish to append an Alphanumeric “Tag” (label) to a memory or memories, to aid in recollection of the
channel’s use (such as a club name, etc.). This is easily accomplished using the Menu mode.
channel’s use (such as a club name, etc.). This is easily accomplished using the Menu mode.
R
EGULAR
M
EMORY
O
PERATION
1. Recall the memory channel that you wish to ap-
pend a label.
2. Press and hold the [F] button for one second to
enter the Menu mode again. The “
” icon
will appear on the display.
3. Rotate the [DSP/SEL] knob to select the menu
item “MEM TAG”.
4. Press the [DSP/SEL] knob to enable adjustment
of this menu item. The “
” icon will blink,
and “MEM TAG” will be replaced with “TAG-OFF”
5. Press the [F] button to display the previously stored
label (in the factory default, all memory channels
are stored with the memory channel number as
the label).
are stored with the memory channel number as
the label).
6. Rotate the [MAIN DIAL] knob to select the first
digit of the desired label.
7. Rotate the [DSP/SEL] knob one step clockwise
to move to the next character.
8. Repeat steps 6 and 7 to program the remaining
letters, numbers, or symbols of the desired label.
Seven characters may be used in the creation of
a label.
Seven characters may be used in the creation of
a label.
9. If you make a mistake, rotate the [DSP/SEL] knob
counter-clockwise to move back the cursor, then
re-enter the correct letter, number, or symbol.
You may press the [CLAR] button to clear the cur-
rent digit label.
re-enter the correct letter, number, or symbol.
You may press the [CLAR] button to clear the cur-
rent digit label.
10.When you have completed the creation of the la-
bel, press the [DSP/SEL] knob. The “
” icon
returns to appear continuously.
11. Press and hold the [F] button for one second to
save the new setting and return to normal opera-
tion.
tion.
In Memory mode operation, the display indicates the
channel numbers while selecting the memory chan-
nels, then the display will switch to the Alphanumeric
“Tag” (label) after two seconds.
channel numbers while selecting the memory chan-
nels, then the display will switch to the Alphanumeric
“Tag” (label) after two seconds.
[DSP/SEL] Knob
[V/M
/
MW] button
[F] button
[MAIN DIAL] Knob
[CLAR] button