ZyXEL Communications Computer Accessories Powerline Ethernet Adapter Series 사용자 설명서
Chapter 1 Introducing the PLA-4xx
PLA-4xx Series User’s Guide
20
"
Buildings and even streets may share a coaxial cable connection. If your
powerline network uses a coaxial cable, the network will probably extend
outside your premises. In this case make your network more secure with a
private network name.
powerline network uses a coaxial cable, the network will probably extend
outside your premises. In this case make your network more secure with a
private network name.
3 You may need to change the Network Name to create multiple powerline networks. See
the next section for more information on how to set up a multiple network.
1.6 Multiple Networks
Multiple powerline networks can coexist on a single powerline circuit. You might want to
implement multiple powerline networks in a small office environment where you have two
separate Ethernet networks.
implement multiple powerline networks in a small office environment where you have two
separate Ethernet networks.
1 Connect one powerline adapter to a router or switch on the first Ethernet network and
assign a Network Name (for example “Password1”) to this powerline adapter. Add
additional powerline adapters to your network by plugging them into your powerline
outlets and assigning them “Password1”. This completes the configuration of your first
powerline network.
additional powerline adapters to your network by plugging them into your powerline
outlets and assigning them “Password1”. This completes the configuration of your first
powerline network.
2 Connect another powerline adapter to a router or switch on the second Ethernet network
and assign a different Network Name (for example “Password2”) to this powerline
adapter. Again, add additional powerline adapters and assign them “Password2”.
You now have two private networks on your powerline circuit. Information is not shared
between the two networks as only powerline adapters with the same Network Name can
communicate with each other.
adapter. Again, add additional powerline adapters and assign them “Password2”.
You now have two private networks on your powerline circuit. Information is not shared
between the two networks as only powerline adapters with the same Network Name can
communicate with each other.