Znyx Networks bh5700 사용자 설명서

The syntax for a network interface statement is the interface name followed by a colon and an 
action. Network interface statements are used to create or tear down a VLAN group and can 
consist of one or a list of network interface names; followed by a colon and then an action.  For 
example:

zhp0: <Network Interface Action>;

Network interface actions may include:

vlan<N> = list of ports or trunks

Creates a network interface and a VLAN group with a VLAN 
identification number (VID) consisting of specified port 

members. 

<N>   is an integer between 1-4095.

list of ports or trunks
A port member is identified with the zre<X> format, where x 

represents a port number between 0-23 for the in-band ports. A 
trunk is identified with the zrl<Y> format, where Y is a 

number between 0-31.

If the network interface and VLAN group already exist, the 
specified ports or trunks are added to the network interface 

and VLAN group.

teardown

Deletes the network interface and the associated 

VLAN group.

zre_list = multicast <mac_address>

Register the multicast <mac_address> on the zre_list ports 
associated with the given VLAN

multicast_clear Clear all registered multicast address on all 

the ports in the VLAN

<list of ports or trunks>  teardown
Deletes the specified ports or trunks from the network 

interface and the VLAN group associated with it. If there are 
no remaining port or trunk members, then also deletes the 

network interface and VLAN group.

The statement below creates a VLAN group with the VID number 1 and the network interface 

named 

zhp5

. This VLAN includes a single switch port, 

zre1.

zhp5: vlan1=zre1;

The next statement creates a VLAN group with the VID number 100 and the network interface 

Ethernet Switch Blade User's Guide

release  3.2.2j

page  202