Zhone 4929 DSLAM 사용자 설명서

48

4929 DSLAM Installation and User’s Guide

4929-A2-ZN20-30

2 In the Add Ports drop-down list, select All or a group of ports. To select 

multiple ports, hold the Ctrl key while clicking on your selections.

3 Select or enter the following parameters:    

Reset the IP Range rules 

to default parameters

Click in this box to reset IP Range rules when 

the Submit button is clicked on.

Global Configuration IP 

Range Rule

Specify Add, Delete, or No Set to add a rule, 

delete a rule, or perform no action when the 

Submit button is clicked on.

Activate

Specify whether the rule you are adding is 

active.

IP Range

Specify the range of IP addresses that constitutes 

a match for this rule.

Allow Tag/Untag on 

Ingress Pkt.

Specify tag or untag. Tag indicates that ingress 

packets already matched to the IP Rule must 

have a VLAN tag to be further considered; 

packets without a VLAN tag will be dropped. 

Untag indicates that ingress packets already 

matched to the IP Rule cannot have a VLAN tag 

to be further considered; packets with a VLAN 

tag will be dropped.

VLAN

Specify a VLAN ID range. For each Global IP 

Range Rule, if you selected Tag for Allow Tag/

Untag, the VLAN field should specify either an 

acceptable single VLAN, or an acceptable 

VLAN Range, for VLAN tags on ingress 

packets. If you selected Untag, the VLAN field 

should specify a single VLAN only if you intend 

to have a VLAN tag added to packets; if you do 

not intend to have a VLAN tag added to packets, 

the VLAN field should be left at the 0 - 0 

default.

Add VLAN to Ingress 

Pkt.

Specify whether the VLAN ID should be added 

to ingress packets.

Priority

Specify the priority to be used when adding a 

configured VLAN ID to a packet.