Zhone 4929 DSLAM 사용자 설명서

4929-A2-ZN20-30

 4929 DSLAM Installation and User’s Guide

77

The commands use the following parameters. 

DISABLE_WEB_SERVER]

Disables access to the DSLAM using the web server.

ENABLE_TELNET

Enables access to the DSLAM using Telnet.

ENABLE_TFTP

Enables access to the DSLAM using Trivial File Transfer Protocol.

ENABLE_WEB_SERVER

Enables access to the DSLAM using the web server.

HELP

Lists available commands and their syntax.

LOGOUT

Ends the CLI session.

SET

Sets a configuration option. Most SET commands require that slot 

be specified, and allow port optionally to be specified. Exceptions 

are the two system SET commands for session timeout and system 

name.

Syntax:

set cli_session_timeout seconds

set system_name name

set slot 1 [[port] [all, port_number]] [item] [value] 

Items and values for SET commands are shown in 

.

SHOW

Shows a configuration option. SHOW commands require that slot be 

specified, and allow port optionally to be specified.

Syntax:

show slot 1 [[port] [all, port_number]] [item]  [value] 

Items and values for SHOW commands are shown in 

.

WHO

Shows who is logged in the system.

ADSL_ENCAPSULATION

[RFC1483-LLC,RFC1483-VCMUX]

ADSL_PORT_MODE

[ON,OFF,ADAPTIVE,FIXED_ADAPTIVE]

ADSL_SPEED

[XXXX YYYY] 

Where: 

XXXX = downstream rate (in kbps) and 

YYYY = upstream rate (in kbps)