VXi VT1422A 사용자 설명서
VT1422A Command Reference 377
SOURce
•
The variable frequency control for this channel is provided by the algorithm
language. When the algorithm executes an assignment statement to this channel,
the value assigned will be the frequency setting. For example:
the value assigned will be the frequency setting. For example:
O143 = 2000 /* set channel 43 to 2 kHz */
•
Send with VXIplug&play Function: hpe1422_cmd(...)
Usage
SOUR:PULS:WIDTH 2.50E-3,(@143)
set fixed pulse width of 2.5 ms on
channel 43
channel 43
SOURce:PULSe:WIDTh?
SOURce:PULSe:WIDTh? (@<ch_list>)
returns the fixed pulse width value on a
frequency modulated pulse channel.
Parameters
Comments
•
The <channel> parameter must specify a single channel.
•
If the channels specified are not on a Frequency/Totalize SCP, an error will
be generated.
•
Returned Value: returns the numeric pulse width. The type is float32.
•
Send with VXIplug&play Function: hpe1422_cmdReal64_Q(...)
SOURce:VOLTage[:AMPLitude]
SOURce:VOLTage[:AMPLitude] <-offset_v>,(@<ch_list>)
can be used to
reduce bridge offset voltage present at the dynamic strain "Buffered Output"
channel connectors.
channel connectors.
Parameters
Comments
•
If the channels specified are not on a VT1529A/B, an error will be generated.
•
*RST Condition: SOUR:VOLT 0,(@ <all VT1529A/B channels>)
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel
string
100 - 163
none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
-offset_v
numeric (float32)
-1.651 to +1.664 | MIN | MAX
(resolution 13 mV)
volts
ch_list
string
10000 - 15731
none