VIVOTEK Vivotek Automobile Electronics vc8201 사용자 설명서

 

 

This section explains how to configure the Network Camera to enable motion detection. A total 
of five motion detection windows can be configured.

Follow the steps below to enable motion detection:

1. Click 

New to add a new motion detection window.

2. In the Window Name text box, enter a name for the motion detection window.

■ Use four mouse clicks to define the area where Motion Detection will take effect. 

■ To change the four points of the rectangular, place your mouse cursor on any of it until it turns into a 

four-direction mark  .  

3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the 

Sensitivity and Percentage slide bar.

4. Click 

Save to enable the settings.

5. Select 

Enable motion detection to enable this function.

For example:

The Percentage Indicator will rise or fall depending on the variation between sequential images. When 

motions are detected by the Network Camera and are considered to have exceeded the defined 

threshold, the red bar rises. Meanwhile, the motion detection window will be outlined in red. Photos or 

videos can be captured instantly and configured to be sent to a remote server (Email, FTP) using this 

feature as a trigger source. For more information on how to set an event, please refer to Event settings