VIVOTEK NR7401 사용자 설명서

 

 

 

 

This page allows Administrator to restore the Network Video Recorder to factory default,  format 

hard disk, and upgrade firmware version, etc.

Reboot: This feature allows you to turn off and then turn on the Network Video Recorder� It takes about 

one ~ two minutes to complete the process� If the connection fails after rebooting, manually enter the IP 

address of the Network Video Recorder in the address field to resume the connection. 

Restore Default Except Network Settings: This feature allows you to restore the Network Video Recorder 

to factory default but retain the Network settings (WAN IP Address).

Restore Factory Default: This feature allows you to restore the Network Video Recorder to factory default�  

Please note that the linked devices will be removed from the Device setting page, and all settings will be 

erased� But the recorded data will remain on the History page�

The following message is displayed during the rebooting and restoring process�

This column shows the information of your hard disk. For the first time you install the hard disk, please 

format it before recording� In addition, if you want to delete all recorded data, you can click 

Format Disk 

to clean the hard disk� The following message is displayed during the formating process�

This feature allows you to upgrade the firmware on your Network Video Recorder� Download a new 

firmware file from VIVOTEK website. The file is in .upt file format.

It takes about five minutes to complete the process� Note that do not power off the Network Video 

Recorder  during  the  upgrade� The  Network  Video  Recorder  starts  to  upgrade  and  will  reboot 

automatically when the upgrade completes�