Visioneer MX 230 사용자 설명서
42 V
ISIONEER
MX 230 D
IGITAL
C
AMERA
U
SER
’
S
G
UIDE
C
OPYING
I
MAGES
TO
Y
OUR
C
OMPUTER
When connected to your computer, your digital camera behaves
like any other drive attached to your computer.
like any other drive attached to your computer.
There are two ways to copy photos and videos from your camera to
your computer: using Windows Explorer or using the Visioneer
Digital Camera Utility software. The Visioneer Digital Camera
Utility contains more copy and delete options.
your computer: using Windows Explorer or using the Visioneer
Digital Camera Utility software. The Visioneer Digital Camera
Utility contains more copy and delete options.
To connect your camera:
1.
Connect the small connector of the USB cable to the USB
port on the camera. See “Back View” on page 6 for the
position of the USB port on the camera.
port on the camera. See “Back View” on page 6 for the
position of the USB port on the camera.
2.
Connect the large end of the USB cable to an empty USB slot
on your computer. To locate a USB slot, look for the USB icon
next to the connection slot.
on your computer. To locate a USB slot, look for the USB icon
next to the connection slot.
3.
Turn on the camera with the Mode dial set to any mode
except PC.
except PC.
Note:
Before copying images to your computer, you must