Videk VISIONSENSOR 2030 사용자 설명서
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 -
9
Save Settings
1.6.2.1 - USB Communication Settings
USB Keyboard Mode - Data is sent from the Reader and interpreted by the host just as if a US keyboard
was being used to enter data.
USB Downloader - This mode is the standard way of transferring batch files or new firmware through the
USB port.
USB Native Two Way Mode - This mode is utilized when there is a need for error-corrected communica-
tion between the VS 2030 and an application through the USB port.
USB Virtual COM 1 Way Mode - This mode allows a USB-cabled VS 2030 to function as a virtual COM
port. To use the VS 2030 in this mode, download the driver at www.videk.com
Scan the following codes to set the appropriate USB communication setting:
USB Keyboard (Default)
USB Downloader
USB Native Two Way Mode
USB Virtual COM 1 Way Mode
Reset to USB Factory Defaults
NOTE: After making changes to settings by scanning the setup/configuration codes, always scan
the “SAVE SETTINGS” code at the bottom of the page to assure that the new settings will be saved
in the VS 2030 memory for use the next time the reader is powered on.
You must first install the
virtual com port driver
before utilizing this mode.