Videk VISIONSENSOR 2030 사용자 설명서
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 -
27
Save Settings
3. - Introduction
The following chapter will allow a user to change the symbology settings on the VS 2030. To reset the unit
to factory defaults or to save the current settings please scan one of the codes below:
to factory defaults or to save the current settings please scan one of the codes below:
Save Settings
Reset to USB Factory Defaults
Reset to RS232
Clear All CodeXML Rules
Factory Defaults
Readers are shipped from manufacturing with initial communication settings that are hardware dependent.
Note: If you do not save your settings and the VS 2030 loses power you will lose your settings.
Note: If you do not save your settings and the VS 2030 loses power you will lose your settings.
3.2 - Aztec Symbology
Scan the following codes to enable/disable Aztec symbology settings:
Aztec On
Aztec Off (Default)
Sample Aztec Code
3.3 - Codabar Symbology
Scan the following codes to enable/disable Codabar symbology settings:
Codabar On (Default)
Codabar Off
Sample Codabar