Videk VISIONSENSOR 2030 사용자 설명서
K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 -
50
Save Settings
6.1 - Prefix Settings
If you scan the following codes, you will lose any unsaved settings. Make sure to save settings on your
reader before scanning the prefix codes. If you scan more than one prefix you will receive each scanned
prefix in your scanned data; (i.e., if you scan comma prefix twice, you will get two comma prefixes). Scan
the following codes to set appropriate prefix:
Prefix - Comma
reader before scanning the prefix codes. If you scan more than one prefix you will receive each scanned
prefix in your scanned data; (i.e., if you scan comma prefix twice, you will get two comma prefixes). Scan
the following codes to set appropriate prefix:
Prefix - Comma
Prefix - Space
Prefix - Tab
(USB Mode)
Prefix - Tab
Prefix - Erase
Prefix - Carriage Return Line Feed
Note: If you require a special configuration, please contact Videk at (585) 292-6210 or (800) 24-VIDEK.
6.2 - Suffix Settings
If you scan the following codes, you may lose your current settings. Make sure to save settings on your
reader before scanning the Suffix codes. If you scan more than one suffix you will receive each scanned
suffix in your scanned data; (i.e., if you scan comma suffix twice, you will get two comma suffixes). Scan
the following codes to set appropriate suffix:
reader before scanning the Suffix codes. If you scan more than one suffix you will receive each scanned
suffix in your scanned data; (i.e., if you scan comma suffix twice, you will get two comma suffixes). Scan
the following codes to set appropriate suffix:
Suffix - Carriage Return
Suffix - Comma
Suffix - Line Feed
Suffix - Carriage Return Line Feed
Suffix - Space
Suffix - Enter
Only Use with
Serial Applications
Serial Applications
Only Use with
Serial Applications
Serial Applications
Only Use with
Serial Applications
Serial Applications
Only Use with
USB or Keyboard
Mode
USB or Keyboard
Mode
Only Use with
Serial Applications
Serial Applications
This code will
erase all prefix
data.
erase all prefix
data.