Vertek/XTC SCORPION 2330 사용자 설명서

When set, allows the system to be switched off by pressing the SELECT touch 
pad twice while holding down the PAGE UP touch pad.

Set video scaling to match the aspect ratio of connected TVs. There are a couple 
of compromise settings when there is a mixture of TV types.

Set advert scaling to match the aspect ratio of connected TVs. There are a couple 
of compromise settings when there is a mixture of TV types.

Coin validators can either have high pulses or low pulses. Incorrect pulse polarity 
will cause either an extra pulse to be intermittently generated or the last pulse 
receive not to be recognised. Check this using item 699 - Test Coin System. 
Note: After changing this item you will need to exit administration and save 
settings for it to take effect.

Connecting a 12V computer fan to programmed output 4 enables venting of the 
jukebox cabinet. Setting this option makes sure output 4 remains active whenever 
the system is running. Refer to the chapter on connections for more information.

Sets the pattern for the light chaser. Refer to the chapter on connections for more 
information.

When set, this item enabled the DVD drive to operate in user mode. Otherwise, it 
will only operate when in the administration area.

When set, this item enabled the front panel USB ports  to operate in user mode. 
Otherwise, they will only operate when in the administration area.

Controls the front panel channel B speaker sockets. Switch this off if you don't 
want users trying to connect extra speakers to the system risking damage.

This item will show Available if there is an active firmware update pending. 
Selecting this item will execute the update.