Uniden UDW10055 사용자 설명서

18

If you have any trouble with your system, try these simple steps first. If you still have a question, call 
our Customer Care Line listed on the front cover.

The image on the 

display is too bright.

 -Adjusting the brightness on the receiver (in the System Setup sub-menu).

 -Moving the camera’s sun shield over the lens.

The image on the 

display is too dim.

 -Adjusting the brightness on the receiver (in the System Setup sub-menu).

 -Making sure the camera is at the right distance for low-light conditions.

The image on my 

television is too bright/

dark.

 -Adjusting the brightness on your television. (The receiver brightness 

setting does not affect the television.)

The image does not fit 

my TV screen.

 -Changing the TV out setting on the receiver (in the System Setup sub-

menu).

The display is 

completely blank.

 -Making sure the AV output cable is not connected. 

 -Making sure the receiver is plugged in.

 -Switching to a different camera. (If the receiver is in quad display mode 

and the cameras are not working, the screen could be blank.)

 -Resetting the receiver.

The display just says 

No Signal.

 -Switching to a different channel. 

 -Checking the channel status icon at the top of the screen to see which 

channel the receiver is on. Make sure the camera assigned to this 

channel is powered on.

 -Re-pair the camera to the receiver.

The display just says 

USB PC Camera Mode.

 -Disconnecting the USB cable.

The image on the 

screen is frozen.

 -Resetting the camera.

 -Resetting the receiver.

None of the buttons on 

the receiver respond 

when I press them.

 -Resetting the receiver.