Uniden BC95XLT 사용자 매뉴얼

다운로드
페이지 64
24
Setting Up Your Scanner
external mobile antenna or outdoor base station 
antenna.
Note: Always use 50-ohm, RG-58, or RG-8, coaxial 
cable to connect an outdoor antenna. If the antenna 
is over 50 feet from the scanner, use RG-8 low-loss 
dielectric coaxial cable. You can get a BNC adapter 
at your local electronics store.
Connecting an Earphone/Headphone
For private listening, you can plug a 
1
/
8
-inch (3.5 
mm) mini-plug earphone or mono headphones (not 
supplied) into the headphone jack on top of your 
scanner. This automatically disconnects the internal 
speaker.
Connecting an Extension Speaker
In a noisy area, an optional extension speaker, 
 
positioned in the right place, might provide more 
comfortable listening. Plug the speaker cable's 
1
/
8
-
inch (3.5-mm) mini-plug into your scanner's jack.
   WARNING!
 
If you connect an external speaker to the scanner's 
headphone jack, never connect the audio output line 
to a power supply and ground. This might damage 
the scanner.
Squelch
Volume
BC95XLT
Headphone
Jack
Antenna BNC
Connector