Uniden BC95XLT 사용자 매뉴얼

34

2 seconds after the end of a transmission before 
scanning proceeds to the next channel. To turn 
the function off or on, press Func + Dly.

•

If you enter a frequency that has already been 
entered elsewhere, the scanner sounds an error 
tone and displays the channel that was 

 

duplicated. If you entered the frequency by mis-
take, press   then enter the correct frequency. 
To enter the frequency anyway, press E to 
accept.

4. To program the next channel in sequence, press 

Func + E then repeat Steps 2 and 3.

 

If you do not have a reference to frequencies in your 
area, use a search (except weather service search) 
to find a transmission.

Note: When the scanner starts searching, it auto-
matically turns on the delay function. To turn delay 
on or off, press Func + Dly.

You can search for weather, ham, marine, aircraft, 
police, or fire transmissions without knowing the 
specific frequencies used in your area. The scanner 
is preprogrammed with all the frequencies allocated 
to these services. To use this feature, press Func 
and Svc. SRCH appears and the scanner searches 

starting with the weather service bank. To select a 
different service bank, repeatedly press Func and 
Svc. Service mode appears on the display.

When the scanner stops on a transmission, press 
Hold to stop searching and listen to the 

 

transmission. Hold appears. In this mode, you can