Uniden BC95XLT 사용자 매뉴얼

37

TM

Your scanner's Close Call feature lets you set the 
scanner so it detects then displays the frequency of 
a nearby strong radio transmission. Close Call RF 
capture works great for finding frequencies at 

 

venues such as malls and sporting events. You can 
set the scanner so Close Call detection works "in the 
background" while you are scanning other 

 

frequencies, turn off normal scanning while Close 
Call is working, or turn off the Close Call feature and 
use the scanner normally. You can set the scanner 
so it alerts you when the Close Call feature detects a 
frequency. You can also set the frequency band 
where you want the scanner to look for 

 

transmissions.

Unlike searching, which requires the scanner to tune 
to a frequency to check for a transmission, Close 
Call RF capture directly detects the presence of a 
strong, nearby signal and instantly tunes to the 
source’s frequency.

Notes: 

•

Close Call RF capture works well for locating the 
source of strong local transmissions such as 
mobile and handheld two-way radios in areas 
with no other strong transmission sources. 

 

However, if you are in an area with many 

 

transmission sources (such as pager radio

 

transmitters, multi-use radio towers, traffic 

 

control devices, etc.), Close Call RF capture 
might not find the transmission you are 

 

searching for, or it might find a transmission 
other than the one you are searching for.

•

Close Call RF capture cannot detect satellite 
dishes or any transmitter with a frequency above 
or below the frequency ranges listed under 

 

“Setting the Close Call Options” on Page 38.