Uniden BC95XLT 사용자 매뉴얼
40
Special Features
ALt bP-Lt: The scanner flashes the display
backlight and beeps when a Close Call signal is
detected.
detected.
ALt OFF: The scanner does not provide any
alert when a Close Call signal is detected.
6. Repeatedly press or until the option you want
appears, then press E to select it. Otherwise, press
if you do not want to select it. Then skip
to Step 11.
7. Press E while C-C.PS appears. One of the
following Pager Screen options appears.
PS On: The scanner ignores hits on common
pager frequencies.
PS OFF: The scanner alerts you when it receives
hits on common pager frequencies.
8. Repeatedly press or until the option you
want appears, then press E to select it. Other-
wise press if you do not want to select it. Then
skip to Step 11.
wise press if you do not want to select it. Then
skip to Step 11.
9. Press E while C-C.dnd appears. One of the fol-
lowing Don’t Disturb options appear:
•
dnd ON: The scanner checks for a Close Call
signal every 2 seconds only if the scanner is not
stopped on a transmission.
signal every 2 seconds only if the scanner is not
stopped on a transmission.
•
dnd OFF: The scanner checks for a Close Call
signal every 2 seconds even if the scanner is
stopped on a transmission.
signal every 2 seconds even if the scanner is
stopped on a transmission.
10. Repeatedly press or until the option you
want appears, then press E to select.
11. When you select the option, press Scan to start
Close Call search. Otherwise, to continue normal
scanning, repeatedly press Func until
scanning, repeatedly press Func until
f
disappears
then press Scan.