Uniden UIP300G 사용자 설명서
17
7. Use
to access the IP Address screen on the Network Config menu.
8. Press SELECT key to display the current IP address.
9. Press SELECT key again and enter the new IP address. The format of the IP
9. Press SELECT key again and enter the new IP address. The format of the IP
address is: XXX.XXX.XXX.XXX
Numbers 0~255 are valid entries for the IP address.
The new IP address is not recognized until the telephone has been restarted.
When the telephone has been restarted, the LCD shows “Initializing...\”. After
initialization is complete, the telephone returns to the time and date display.
When the telephone has been restarted, the LCD shows “Initializing...\”. After
initialization is complete, the telephone returns to the time and date display.
The following IP addresses, 0.0.0.0 and 255.255.255.255, are not valid.
10. After the correct IP address is entered, press SELECT key.
11. When the “Press SELECT to Restart” message is displayed, press
11. When the “Press SELECT to Restart” message is displayed, press
CANCEL/DEL key to return to the Network Config menu.
12. Use the
to access the Subnet Mask screen on the Network Config Menu.
13. Press SELECT key to display the current Subnet Mask address.
14. Press SELECT key again and enter the new Subnet Mask. The format of the
14. Press SELECT key again and enter the new Subnet Mask. The format of the
Subnet Mask is:
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
Numbers 0~255 are valid entries for the Subnet Mask.
15. After the correct Subnet Mask is entered, press SELECT key.
Network Config:
IP Address
2/6
Network Config:
Subnet Mask
3/6