Uniden CAM650 사용자 매뉴얼

다운로드
페이지 6
•  2.7” screen
•  Recording to microSD card
•  G-Sensor with Collision Detection 
Mode
•  GPS Built In
WHAT’S IN THE BOX
•  Camera/Recorder
•  HDMI Cable
•  Car Adapter
•  Owner’s Manual
•  MiniUSB-USB Cable
•  Windshield Mount
If any items are missing or damaged, contact our Customer Care Line 
immediately at 800-297-1023. Never use damaged products!
Need help? Get answers 24/7 at our website: www.uniden.com.
CONTROLS AND INDICATORS
microSD slot
Locking ring
Lens
HDMI Jack
Mode 
or Menu
OK
(Record start/stop
Select item)
Scroll 
down
Power on LED
Camera release 
latch
AV out 
USB
Scroll 
up
Camera 
Shutter
Power
On/Off
INSTALLING THE CAM650
Installation Safety Warnings
WARNING!  Failure to comply with the following warnings could result in an 
accident or collision, resulting in death or serious injury.
Do not obstruct the driver’s view or the operation of the vehicle itself.
Do not place it unsecured on the dashboard or in front/above an airbag.
Do not mount the camera where it will become a distraction if it becomes loose.
Do not attempt to operate the camera while driving. If you need to access the 
CAM650 to change settings, etc., pull off the road in a safe manner to do so. 
Some state laws prohibit drivers from mounting anything on the windshield, 
or restrict mounting to specific areas of the windshield. It is the owner’s 
responsibility to mount the CAM650 in compliance with local laws.
1.  Slide the CAM650 onto the bracket hook on the top of the windshield mount until 
it locks into position.
2.  Be sure the locking ring is set to 
UNLOCK. Press the suction cup base to the 
windshield.
3.  Turn the locking ring to 
LOCK. Make sure the stand is locked to the windshield.
4.  Connect the car adapter to the unit and to the cigarette lighter power jack.
5.  Press 
POWER to turn the unit on and check the view. Adjust the angle if 
needed.
6.  To unmount the stand, turn the locking ring to the 
UNLOCK position then lift the 
plastic flap on the base to release it from the windshield.
OPERATION
SET UP THE CAM650
If you are recording (red dot on the screen is flashing), press REC OK to stop 
recording. You cannot enter the menus if CAM650 is recording.
Select a mode and then use the menus for that mode to set up your camera. Press 
MODE to select a mode [Video, Still (photo), or Playback] and then press and hold 
MODE for a moment to display the menus for that mode. The menus for Video and 
Still have 2 options – that mode plus Setting. Playback has three options; you can 
delete or protect files on the microSD card (not included - class 10 microSD card
recommended), or you can watch the recorded files in a slideshow.
Press 
 to toggle between the menus, and use ► and ◄ to scroll thorugh the
menu selections. Press 
REC OK to select a menu option. 
Video Mode
Press 
MODE until 
 displays in the upper left corner of the screen. Press and 
hold 
MODE momentarily to display the Video menu options and press 
 to toggle 
between the menus. Press ► and ◄ to scroll thorugh the menu selections. Press
REC OK to select a menu option.
VIDEO MENU  
SETTING MENU   
Resolution
Date/Time
Loop Recording
Car/Driver ID
Exposure
Auto Power Off
Motion Detection
Key Click Sound
- 3 -
- 2 -