Uniden BCD996T 사용자 설명서

123

4

J

F

At this level you have an opportunity to reassign or edit the 

location type you first selected and set the location to either one of the other types 
or change the data in an existing location.

4

J

F

 Input the latitude and then the longitude.

4

J

F

As you near your target location, an alert sounds at 0.5,

0.25, and 0.1 mi. You can stop this operation by pressing [L/O]. All the data is 
retained.

You can use the menu Lockout option as well. Set the location system to 
Temporary L/O

 so you can move away more than four miles and then come 

back again. At that time, L/O status is automatically canceled.

If you turn off the switch, the scanner is unlocked.

For POI Only
4

J

F

Choose Off so no tone sounds or one of the four 

alert melodies Alert 1 to Alert 4.

Once you make a Tone selection you are immediately asked to assign a volume 
level to that selection.

J

F

Select from 15 sound levels, plus Auto and Off. As 

you rotate the Scroll Control the Alert tone you set is played louder and louder. 
Press

F

 to select a volume level. You can also select Auto, a level that is the 

same setting as your master volume control.

4

J

F

Input how far away the alert sounds for the site (only 

available for POI’s and between .1 and 2.0 miles)

The Alert Tone is fixed. The alert range is auto-set at .5, .25, and .1 mile.

4

J

F

Select from 15 sound levels, plus Auto and Off. As 

you rotate the Scroll Control the Alert tone is played louder and louder. Press 

F

to select a level you want. You can also select Off (no sound) or Auto, a level 
that is the same as your master volume control. 

For Dangerous Xing and Dangerous Road sites there are two additional settings: