Studer Innotec AJ SERIES 사용자 설명서

 

The inverters of the AJ series do not 
need any special maintenance. The 
casing may be cleaned with a damp 
cloth (not wet). 
In the case of malfunction, the inverter 
should be sent back to the manufacturer 
for control in its original packing. 
Before sending the inverter, check the 
table above. 
The battery is loaded and is in 
accordance to the inlet nominal tension 
of the device. 
The consumer devices do not have any 
defects or overload for the inverter. 
Should you contact your salesperson, 
note the following points before calling: 
(you will find this information on the label 
underneath the inverter) 
- Series number 
-  Power of the inverter 
-  Inlet nominal voltage of the inverter 
Before sending back the inverter, do 
take care that it is well packed. The 
inverter must be in a stiff carton box 
and be well protected on all sides by 
mean of an anti-shock and isolating 
layer of min. 5cm thickness. 
The damages occurring during the 
transport are not covered by the 
warranty. 

The warranty period is 2 years. 
It will be considered void if the unit has 
suffered any physical damage or 
alteration, either internally or externally, 
and does not cover damage arising from 
improper use like: 
− Reverse of battery polarity 

− 

Inadequate input voltage (over 
voltage) 

− Back-feed of the inverter output by 

public network, generator or any other 
source. 

− 

Mechanical shock or deformation 
specially by transport due to an 
inadequate package. 

− Contact with liquid or oxidation by 

condensation 

− 

Use in inappropriate environment 
(dust, corrosive vapour, humidity, high 
temperature,...) 

This warranty will not apply where the 
product has been misused, neglected, 
improperly installed, or repaired by 
anyone other than STUDER INNOTEC 
or a company authorised by STUDER 
INNOTEC. In order to qualify for the 
warranty, the product must not be 
disassembled or modified. 

STUDER INNOTEC cannot control the 
installation, use and maintenance of the 
inverter. Thus, we are not responsible 
for damages, costs or losses resulting 
from an installation which is not in 
accordance with the regulations or 
inappropriate use or maintenance. 
The customer is always responsible for 
the use of the inverters STUDER 
INNOTEC. 
This device has not been designed and 
is not warranted for use in life support 
apparatus or any other critical device 
with potential risks of important harm to 
people or to the environment. We do not 
accept any responsibility for any 
violation of patent rights or other third 
person rights resulting from the use of 
the inverter. 
STUDER INNOTEC keeps the right to 
modify their products without previous 
notice. 

Functions on remote control are the 

same as control and 
indicator on the inverter 
(see chapter Use) 
Remote control should 
be connected with the 
inverter with the original 
10m. STUDER cable or