Siemens Webcam TP177B 사용자 설명서
Automation and Drives - SCE
T I A Training Document
Page 10 of 129
Module
F6
Issued: 02/2008
Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
2.2.2
Installing WinCC flexible
After all system requirements that have been mentioned are met, install WinCC flexible from the CD-
ROM. Select the scope for installing components and product languages.
ROM. Select the scope for installing components and product languages.
• Standard installation: recommended
• Minimum installation: to save memory
• User defined installation: to specify yourself which components and product languages are
• Minimum installation: to save memory
• User defined installation: to specify yourself which components and product languages are
installed
In addition, the required licenses have to be transferred. You can install the licenses along with the
components and product languages, or you can install them subsequently. If you have obtained
WinCC flexible options, install each option separately. An option is installed by loading the
associated license key.
Detailed information regarding the installation are provided in the Installation Instructions on the CD-
ROM 'WinCC flexible Software CD1’ in the folder "Documents\<Language>\Installation Guides“.
2.2.3
Deinstalling WinCC flexible
Close all applications that are open, particularly the WinCC flexible Engineering System and WinCC
flexible Runtime. Deactivate WinCC flexible Smart Start.
Additional notes on WinCC flexible Smart Start are provided in the chapter "WinCC flexible Smart
Start".
Open the system control by means of "Start ► Settings ► System Control".
In the system control, double click on the entry "Software". The dialog "Software" is opened.
In the dialog "Software", select the entry "SIMATIC WinCC flexible 2005". The button
"Change/remove" is displayed.
Click on the button "Change/Remove". The WinCC flexible InstallShield Wizard is opened.
Activate the option "Remove program" and click on the button "Continue".
Confirm the deinstallation with "OK". WinCC flexible is removed from the configuring computer.
In the dialog that follows, close the deinstallation with the button "Complete".
Close all applications that are open, particularly the WinCC flexible Engineering System and WinCC
flexible Runtime. Deactivate WinCC flexible Smart Start.
Additional notes on WinCC flexible Smart Start are provided in the chapter "WinCC flexible Smart
Start".
Open the system control by means of "Start ► Settings ► System Control".
In the system control, double click on the entry "Software". The dialog "Software" is opened.
In the dialog "Software", select the entry "SIMATIC WinCC flexible 2005". The button
"Change/remove" is displayed.
Click on the button "Change/Remove". The WinCC flexible InstallShield Wizard is opened.
Activate the option "Remove program" and click on the button "Continue".
Confirm the deinstallation with "OK". WinCC flexible is removed from the configuring computer.
In the dialog that follows, close the deinstallation with the button "Complete".