Siemens Webcam TP177B 사용자 설명서
Automation and Drives - SCE
T I A Training Document
Page 62 of 129
Module
F6
Issued: 02/2008
Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Projekt Messages Recipes User Management
6.3.5
Setting the Transfer Properties
On the desktop, click on the symbol
Select MPI/Profibus and click on the button Advanced.
In the window that follows, select MPI and confirm with OK.
On the desktop, click on the symbol
Select MPI/Profibus and click on the button Advanced.
In the window that follows, select MPI and confirm with OK.
Note
The settings at Transfer Settings have nothing to do with the connection settings in the
WinCC flexible project.
For example, data can be transferred between Panel TP177B and WinCC flexible by means of the
Ethernet interface, and the panel and the SIMATIC S7 controller can communicate by means of the
MPI.
6.3.6 Transfer
Mode
Close the desktop and switch the panel to the Transfer Mode.
Connecting to host … appears in the transfer window.