Siemens TIA Portal Module 090-020 사용자 설명서
Industry Sector, IA&DT
SCE Training Curriculum
Page 8 of 48
To be used only at Educational and R&D Facilities
TIA Portal Module 090-020, Edition 03/2013
Unrestricted / © Siemens AG 2013. All Rights Reserved
SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services
3.
Project description
3.1
Hardware configuration
In our sample program for an ink mixing station we use a programming device with WinCC Advanced
V11 and the WinCC Advanced V11 Runtime.
The ink mixing station is controlled using a SIMATIC S7-300. The operator uses a Touch Panel (TP700)
to operate the process via the graphical interface.
The operator, for example, can enter a setpoint for the controller, or start a motor.
The programming device, the SIMATIC S7-300 controller and the TP700 operator panel are
interconnected via the Ethernet interface.
The ink mixing station is connected to the controller via digital and analog inputs and outputs.
interconnected via the Ethernet interface.
The ink mixing station is connected to the controller via digital and analog inputs and outputs.
PC for configuration
TP700 as HMI device
Tank 1
Tank 2
Tank 3
PC