Siemens Treadmill LC 500 사용자 설명서
7ML19985GE01
SITRANS LC 500 – INSTRUCTION MANUAL
Page 79
mm
mmm
mmm
A
ppendi
x C
General Transmitter Information
Damping information
The SITRANS LC 500 transmitter implements damping on most of the transmitter
variables. The damping setting may vary from 1 (shortest value) to 10000 (longest value).
variables. The damping setting may vary from 1 (shortest value) to 10000 (longest value).
Non-volatile Memory Data Storage
The flags byte of Command #0 referenced in the Universal Command Specification
document will have Bit #1 (Command #39, EEPROM Control Required) set to 0, indicating
that all data sent to the transmitter will be saved automatically in the non-volatile memory
upon receipt of the Write or Set Command. Command #39, EEPROM Control, is not
implemented.
document will have Bit #1 (Command #39, EEPROM Control Required) set to 0, indicating
that all data sent to the transmitter will be saved automatically in the non-volatile memory
upon receipt of the Write or Set Command. Command #39, EEPROM Control, is not
implemented.
128
Set Alarm Select
Transmitter Specific
129
Adjust for Product Build-up on Sensor
130
Read Failsafe Mode selection
131
Return Device Config. Info.
132
Write Variable Upper/Lower Limit Values
133
Read Variable Upper/Lower Limit Values
134
Write Keylock Value
135
Read Keylock Value
138
Write Simulation Timer and Value
139
Read Simulation Timer and Value
140
Write S.V. Units and Range Values
141
Read S.V. Unites and Range Values
144
Reset recorded PV min./max. values back to PV
145
Return recorded PV min./max. values
150
Write Analog Signalling Mode
151
Read Analog Signalling Mode
152
Write Digital Signalling Mode
153
Read Digital Signalling Mode
154
Write Analog Threshold Settings
155
Read Analog Threshold Settings
156
Write Digital Threshold Settings
157
Read Digital Threshold Settings
160
Write Delay Timers Analog Signalling
161
Read Delay Timers Analog Signalling
162
Write Delay Timers Digital Signalling
163
Read Delay Timers Digital Signalling
Command
Number
Description
Usage