Siemens SIMATIC NET CP 343-1 사용자 설명서

B3L−15

CP 343-1 Lean for Industrial Ethernet / Manual Part B3L

Release 03/2007
C79000-G8976-C198-04

The different combinations of the LEDs on the front panel indicate the status:

−

S

Starting up after power “ON”

or

S

Stopped (STOP)

 

with errors

In this state, the CPU or intelligent

modules in the rack remain accessible

using PG functions.

Starting up (STOP->RUN)

Running (RUN)

Stopping (RUN->STOP)

Stopped (STOP)
In the STOP mode configuring and performing

diagnostics on the CP remain possible.

−

−

−

S

No LAN cable plugged in

or

S

Duplicate IP address detected

−

−

−

The CP is configured as a PROFINET IO

device; there is no data exchange with the

PROFINET IO controller

Module fault / system error

Downloading firmware.

Firmware was successfully downloaded.

Firmware could not be downloaded.

Legend:

(colored) on

off

(colored) flashing

“−” any