Sears Cordless Drill 315.11485 사용자 설명서

다운로드
페이지 76
17
BATTERIES
The battery pack for your drill-driver is equipped with 
nickel-cadmium rechargeable batteries. Length of service 
from each charging will depend on the type of work you 
are doing.
The batteries in this tool have been designed to provide 
maximum trouble free life. However, like all batteries, they 
will eventually wear out. Do not disassemble battery pack 
and attempt to replace the batteries. Handling of these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:
n
    Store and charge your batteries in a cool area. 
Temperatures below 50°F or above 100°F will shorten 
battery life.
n
    Never store batteries in a discharged condition. 
Recharge them immediately after they are discharged.
n
    All batteries gradually lose their charge. The higher the 
temperature the quicker they lose their charge. If you 
store your tool for long periods of time without using 
it, recharge the batteries every month or two. This 
practice will prolong battery life.
Do not abuse power tools. Abusive practices can damage 
tool as well as workpiece.
Only the parts shown on parts list, page 19, are intended 
to be repaired or replaced by the customer. All other parts 
should be replaced at a Sears Service Center.
WARNING: 
Do not attempt to modify this tool 
or create accessories not recommended for use 
with this tool. Any such alteration or modification is 
misuse and could result in a hazardous condition 
leading to possible serious personal injury.
WARNING: 
When servicing, use only identical 
Craftsman replacement parts. Use of any other part 
may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. 
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: 
Do not at any time let brake fluids, 
gasoline, petroleum-based products, penetrating oils, 
etc. come in contact with plastic parts. They contain 
chemicals that can damage, weaken or destroy 
plastic.
MAINTENANCE
BATTERY PACK REMOVAL AND PREPARATION 
FOR RECYCLING
WARNING: 
Upon removal, cover the battery pack's 
terminals with heavy duty adhesive tape. Do not 
attempt to destroy or disassemble battery pack or 
remove any of its components. Nickel-cadmium 
batteries must be recycled or disposed of properly. 
Also, never touch both terminals with metal objects 
and/or body parts as short circuit may result. Keep 
away from children. Failure to comply with these 
warnings could result in fire and/or serious injury.
To preserve natural resources, please 
recycle or dispose of  batteries properly.
This product contains nickel-cadmium 
batteries. Local, state or federal laws 
may prohibit disposal of nickel-cadmium 
batteries in ordinary trash.
Consult your local waste authority for information 
regarding available recycling and/or disposal options.