Sceptre Projection Television E47 사용자 설명서
- 13 -
www.SCEPTRE.com
SCEPTRE E47 HDTV User Manual
purchase a MHL cable from any electronic store and connect it to
HDMI3 and also your cell phone. Make sure the TV’s source is
changed to HDMI 3 and turn on your cell phone. You should see an
image of your cell phone screen.
HDMI3 and also your cell phone. Make sure the TV’s source is
changed to HDMI 3 and turn on your cell phone. You should see an
image of your cell phone screen.
6.
USB
– USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the TV’s firmware.
7.
Analog Audio Out
– This connection is for connecting to analog
audio receivers.
8.
Video
– Video connects to devices that use composite video cables
such as VCR or DVD player or Wii™. Connect the yellow for video
and the red / white for audio. This port shares the audio jacks
with YPbPr.
and the red / white for audio. This port shares the audio jacks
with YPbPr.
9.
YPbPr
– This connection port is for DVD players or satellite / cable
set-top boxes that use component cables. From left to right, connect
green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio. This port shares the
audio jacks with Video.
green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio. This port shares the
audio jacks with Video.
10.
HEADPHONE
– This connection is for headphones to be attached to
the TV.
Please Note:
This TV features a power saving function which will turn off the
TV automatically after 10 minutes of idling on a connection with
no signal. This feature is present on all connection.
TV automatically after 10 minutes of idling on a connection with
no signal. This feature is present on all connection.