Samsung DAF60 사용자 설명서

 Don't pull the support too hard. You can damage it.

 

 If an error occurs while you are operating this product and it 
doesn't work properly, press the Reset hole with a pen tip or 
similar item for 2 seconds.

 Connect your NFC compatible device via Bluetooth to the Wireless 
Audio Portable using this simple set-up procedure. 
You can play music from the smart phone through the Wireless 
Audio Portable.

 

1.   Turn on the NFC function on the smart phone and make sure 

the screen lock function on the smart phone is off. The smart 
phone's NFC function will not work if screen lock is on.

 

2.   Gently touch the NFC logo [

] on the left of the Wireless 

Audio Portable with the NFC supported device.
•   If the Wireless Audio Portable is off, it will turn on 

automatically.

3.   A pop-up asking whether to proceed with the Bluetooth 

connection appears on the smart phone. Select <Yes>.
•   When the connection is complete, the 'connected' message 

appears.

4.   To disconnect the NFC device, touch the device to the Wireless 

Audio Portable's left panel again. 
•   To connect another NFC device while the first smart phone 

is still connected, touch that device to the Wireless Audio 
Portable's left panel. The Wireless Audio Portable will 
disconnect the first smart phone and connect to the second 
smart phone.

 

✎  The NFC function is built into Android devices running Android 

OS 4.1 Jellybean or later. 

 

-

 If your device is running an Android OS earlier than Android 
OS 4.1 Jellybean, you must download the 'Samsung NFC 
Connection' application from Android market to use the 
NFC function.

 

✎  The position of the NFC antenna differs on smart phones. 

Check where the NFC antenna is located before connecting.

 

✎  If your smart phone is covered with a thick case, the connection 

may not succeed.

 

✎  The N-mark is a trademark or registered trademark of NFC 

Forum, Inc. in the United States and in other countries.

 You can connect the Wireless Audio Portable to Bluetooth devices 
and enjoy music with high quality stereo sound, all without wires!

 

 Connect

 External device

1.   Press the 

FUNC.

 button on the Wireless Audio Portable to select 

the Bluetooth function.

2.   Press the 

FUNC.

 button for 3 seconds in Bluetooth mode.

3.   The Bluetooth indicator blinks quickly and the product changes 

to the pairing mode.

4.   Scan or Search for the Wireless Audio Portable on your 

Bluetooth device.

5.   Select "[Samsung] W_Audio" on the list of items found by the 

Bluetooth device.
•   If the Bluetooth device fails to pair with the Wireless Audio 

Portable, repeat Steps 2, 3, and 4.

6.   Play music on the connected device.

 

✎  A Bluetooth device may cause noise or malfunction, depending 

on usage, when:

 

-

 A part of your body is in contact with the receiving/
transmitting system of the Bluetooth device or the Wireless 
Audio Portable.

 

-

 It is subject to electrical variation from obstructions caused 
by a wall, corner or by office partitioning.

 

-

 It is exposed to electrical interference from same 
frequency-band devices including medical equipment, 
microwave ovens, and wireless LANs.

 

✎  The further the distance between the Wireless Audio Portable 

and Bluetooth device, the worse the quality.

 

✎  The Bluetooth connection only works when the Bluetooth 

device is close to the set. The connection is automatically cut 
off if the Bluetooth device moves out of range. 
Even within range, the sound quality may be degraded by 
obstacles such as walls or doors.

 

-

 In Bluetooth connection mode, the Bluetooth connection will 
be lost if the distance between the Wireless Audio Portable 
and the Bluetooth device exceeds 5m.

 

✎  This wireless device may cause electric interference during its 

operation.