Russound ST2 ST2-XM 사용자 설명서

19

To turn the unit on, push the On/Off button up on the
front panel. Pushing the On/Off button down turns the
tuner off.

From the front panel, use 

to toggle between XM

and AM/FM. A backlight shows behind the selected
label XM (green) or AM/FM (amber) to indicate the
active tuner. In addition, the LCD panel is also backlit
green for Tuner 1 and amber for Tuner 2. Each time a
tuner is selected the display will refresh with the cur-
rent station or preset, and all subsequent memory
preset entries will be associated with that selected
tuner. 

Push 

to switch between AM and FM reception.

Push 

to select an XM operating mode.

Push 

to exit the XM mode selection menu.

Press and hold 

and release. The display shows

the signal strength rating. To exit press 

.

Press and release 

and 

for manual tuning. 

Press and release 

to toggle between stereo and

mono mode. STEREO or MONO appears briefly on the
screen when selecting mode.

Press and hold 

to toggle between distant and

local mode. DISTANT or LOCAL appears briefly on the

screen when selecting mode. Normal operation is in
Distant mode. In cities, antennas can pick up multi-
path signals when they bounce off buildings and get
doubled. The Local mode limits the noise associated
with these reflected signals.

Each tuner has six banks of preset memory settings,
and each bank holds six presets for a total of 36 pos-
sible presets for each tuner (72 total presets).
Presets are associated with the tuner that is selected
at the time the preset is saved. 

From the front panel, perform these steps:

1. Select a tuner using 

. 

2. Use 

to choose from one of six banks (1-6).

3. If AM/FM, select the desired band using 

.

4. Tune to the desired station or channel.

5. Push the desired memory preset (M1 through M6)
button for more than 2 seconds. When the memory
preset is saved, the appropriate preset number (M1
through M6) and SAVED appears on the LCD. The
selected station setting reappears and the sound
resumes after the button is released.

To recall a memory preset, use 

to select the

desired bank, then press the desired preset button
(M1 to M6). In addition to direct selection, the memo-

ry presets can be accessed by using 

and 

to

scroll through all presets for the bank selected. 

Once all of the tuner settings are completed, it may
be advisable to create a backup of the programmed
settings for future use. The backup will then be avail-
able in case tuner settings need to be restored. The
“RNET Backup Utility” is available through the
Document Center at 

www.russound.com. Also

required are a DB9 male-to-female cable and laptop
or desktop PC.