Russound ST2 ST2-XM 사용자 설명서

24

The tuner is power managed by the CAV6.6 or other
RNET-enabled controller. If the tuner is in standby
mode, any button press of the UNO-LRC1 will bring
the tuner out of standby mode when used with the
UNO keypad. 

To select a tuner, push 

and choose the source

number preassigned to Tuner 1 (XM) or Tuner 2

(AM/FM), or use the UNO numeric source inputs at

the bottom of the UNO-LRC1. 

Push 

to toggle between AM/FM reception.

Push 

, 

or 

to toggle between XM

operating modes. 

Press

or

to exit XM operating mode menu. 

Press and hold 

and release. The display shows

the signal strength rating. To exit press 

.

Use the Channel 

and 

or 

and

for manual tuning. To move quickly through the

channels, press and hold the button for more than

1.5 seconds. To directly select a station or channel,

enter the three- or four-digit channel or frequency

(1071 for 107.1, etc.). European regions use five-

digit station frequencies.

The SEEK function is performed by pressing and

releasing the Select 

or 

or 

. To seek

higher frequency station press 

. Press 

for

lower frequencies. Tuning begins at the current fre-

quency, seeks upward (or downward) and stops at the

next tuned station. Pushing 

or 

again con-

tinues the SEEK function. Once the highest frequency

is reached, the tuner continues SEEK mode at the

lowest frequency. 

To scan, press and hold then release 

. The

tuner scans through tuned stations with a 5-second

preview before moving to the next station. To end

scanning, press 

again.

To select a bank, press and hold 

for bank up

or 

for bank down.  

Press  and  or and to 

scroll

through a loop of all the memory presets for the cur-

rently selected bank. Only configured presets will be

displayed.

Press the 

button to mute/unmute the tuner

audio output.