Rose electronic CrystalView 사용자 설명서

 

 

CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL

 

 
CrystalView MINI model is not rack mountable. 
 
The optional rack mount kit includes the following items: 
n Two black anodized mounting brackets. 
n Four 6 - 32 x 3/8” flat head mounting screws. 
 
To rack mount your CrystalView, attach the two rack mounting 
brackets to your Unit with the short flange against the Unit using the 
four screws provi ded.  Do not over tighten the screws used to mount 
the Unit to the mounting brackets.  Use only the hardware provided, 
using hardware other than that provided could cause damage to the 
electronics and/or result in loss of mounting integrity.  Secure the 
mounting brackets to the rack using the appropriate size bolts, nuts 
and lock washers.   
 
The following guidelines should be observed when installing. 
 
a). 

Do not exceed the operating temperature of 0

ο

 

C to 45

ο

 

C. 

b). 

Do not block power supply vents or restrict airflow. 

c). 

Mechanical loading of the rack should be considered to 
prevent instability and possible tipping over. 

d). 

Tighten all connectors securely and provide adequate strain 
relief for all cables. 

e). 

Provide a grounded power source to all Units.  Pay special 
attention to overall branch circuit load ratings before 
connecting equipment to this source.  Overloaded circuits are 
potential fire hazards and can cause equipment failures or 
poor performance.